OMNIVIEWER byBANKASIMEDIA

Check wall thickness.

Colour-code an STL, OBJ or 3MF model by wall thickness: red areas are thinner than your minimum and may not print, green areas are fine.

Models are processed in your browser. No ads, no account.

Wall Thickness Checker for 3D Printing

Set your minimum (for example 0.8 mm for FDM or 0.5 mm for resin) and run the check. The heatmap and the percentage of thin surface show where to thicken the design.

Thickness is measured inwards from every point of the surface.

Frequently asked questions

Is OMNIVIEWER free?

Yes. It is free and open source, with no ads and no account. Donations help pay for hosting and development.

Are my files uploaded?

No. Files are opened and converted inside your browser and are not uploaded to a server. If you turn recent files on, a copy stays in this browser so you can reopen it; you can turn that off.

Does it work on Mac, Windows, Linux and phones?

It runs in current Chrome, Edge, Firefox and Safari on desktop, tablet and phone, with nothing to install. It needs WebGL (3D graphics) to be available.

Is there a file size limit?

There is no fixed limit. Large files depend on your device's memory; phones handle less than computers.

All tools, viewers and converters
Completely free. No ads. Open source. To support hosting and development, donations are welcome.

Drop your model files

Include textures and .mtl / .bin files together with the model